GUSHER INDUSTRIAL COOLANT PUMPS AND Tank Units

CATALOG
MAINTENANCE MANUAL
CONTACT US

Immersed Types – Gusher immersed type machine tool and industrial coolant pumps come in 5 basic configurations.
1. Built in mounting flange with horizontal discharge
2. Built in mounting flange with discharge above the mounting flange
3. Horizontal discharge – dual inlet
4. Vertical discharge- single or dual inlet
5. Stand pipe –inlet type
• Extended models available.

Flange Mounted Types – Flange mounted should be selected when space is limited and an immersed type cannot be used. These pumps are mounted directly to the outside of the reservoir solving limited space problems. Internal discharge pumps are recommended when external piping is not feasible.
• Extended lengths available
• External and Internal Discharge

Tank Units and Accessories – These general-purpose units are widely used for supplying coolant to machine tools not otherwise equipped with a coolant system. Available in standard reservoir sizes from 10 to 200 gallons with pumps from 1/25 through 7 1/2hp, Gusher tank units may be used as permanent, portable, or auxiliary coolant systems.
• Available with standard NEMA foot mounted motors
• Baffles and Chip Baskets Available
• Casters or legs available to facilitate portability







 
Copyright 2007 Gusher Pumps | 115 Industrial Drive | Williamstown, KY 41097 | Phone: (859) 824-3100 | Fax: (859) 824-7248 | Contact Us